BX series All in One Ebike kit

Intelligent assist system
Convert your normal bike into an ebike in 3 minutes

All in one wheel design / Assist range form 30KM to 90KM
Bluetooth display and thumb throttle / APP control
Anti-theft tracking / Smart assist system

Just 3 minutes, transform your bike into an ebike

BX series all in one wheel ebike kit does not have any cable or external sensors at all. It's a fully Bluetooth ebike conversion kit. Just one step to convert,replace the front wheel.

BX series can fit most of the bikes

It can fit Mountain bikes, Road bikes, Folding bikes, City bikes, Trikes and etc. It has rim sizes from 16" to 29" and 700C.

5 smart assist modes

We have spent 5 years on developing and optimizing the assist system. The assist system is based on the speed, acceleration, the road slope, and also the assist level that you set in the APP or on the Bluetooth display, calculating out the power you need. It will assist you automatically when you pedal. And we will keep on optimizing the system and publish it from time to time. You will be able to update the system via the APP.

Dedicated APP provides you wonderful cycling experience

You can use the APP to control the wheels, upgrade the firmware, set the assist mode, set the assist level, calibrate the gyroscope angle, and detect the fault. And also you can check the speed, temperature, power, mileage, etc.

Anti-theft Tracking Function: Lost bike tracking. You can report lost when your bike is stolen.

After you report lost, once the thief tried to connect the wheel with the APP, the system will locate the mobile phone, disable the motor immediately and upload the information to the server.

Speed up to 32km/h
Speed limitation is settable in the APP.

The default maximum speed is 25km/h, you can set the speed limitation up to 35km/h in the APP.

Overspeed alarm makes it safer to ride

You can set the overspeed alarm value in the APP. It will alram when the speed is over the value you set.

IP65 waterproof grade

IP65 waterproof grade makes you ride freely in the rain.

250W high speed brushless permanent magnet motor

Compact size, light weight, high efficiency, stable operation, long life
Planetary gear and clutch: It's easy to ride even when the battery is dead.

Power :  250W
Voltage : 36V
Structure :  Gear Drive
Efficiency :  >80%
Maximum torque :  30N.m

Closed all in one hub design
Easy Clean Simple

BX series integrates battery, motor, controller all into the hub. You can turn your bike into an ebike with everything hidden in the front wheel and keep the original design of your bike without any cable connections or accessories at all.

Micro power system

5 years of research and development has gone into creating a versatile and cost-effective product for cyclists. The micropower system offers intelligent assistance with induction brakes that have a response time of 10ms. The system can sense the speed, acceleration and road slope, it will help you automatically when you pedal.

ARM Cortex-M3 main chip

With 6-axis gyroscope motion processing chip
Configure Bluetooth Low Energy 4.0
10 pieces of high-sensitivity speed measuring magnets for precise speed measurement

High quality 18650 lithium battery

EV lithium-ion battery cell with internal resistance as low as 18mΩ, capacity of 2900mA, 3C high-rate discharge. The 18650 power lithium battery offers consistency, high energy density, and faster charge/discharge performance. Tried and tested over time, 80% capacity remains after 1000 cycles, making this high-quality lithium battery’s lifetime more than 5 years.

Using Taiwan high-performance and high-safety BMS battery protection system

Axle end charging port, simple and convenient

Charging time: 1 hour (BX10D), 2 hours (BX20D), 3 hours (BX30D)

Kit list